Puretec Z7 Inline Undersink Water Filtration 1 Micron
Puretec Z7 Inline Undersink Water Filtration 1 Micron
Brand:
PuretecCouldn't load pickup availability
Estimated Installation: 2-4 Business Days
Installation T&C's: Details Below
Description
Installation T&C's
Puretec Z7 Inline Undersink Water Filtration 1 Micron. The PureMix Z7 system is designed specifically for applications with higher sediment and harsher water quality such as rural supplies, areas with older pipe infrastructure and rainwater. With 3 levels of filtration, the PureMix Z7 filters out sediment, rust and dirt down to 1 micron. Bad taste, odour, chlorine and other chemicals leaving healthy, great-tasting, clean, safe and pure water.
Valve-in-filter Head Technology
Puretec provides a complete kit for a standard installation and has introduced valve-in-filter head technology, which means the cartridge can be quickly and easily changed without turning off the water supply.
Filters As Easy To Change As A Light Globe
The Puretec PureMix Z7 quick-change cartridge can be easily replaced - just like changing a light globe. It also incorporates Puretec’s long-life filter technology, so you can go longer between filter replacements, and comes with our ^10 Year Platinum Protection Warranty.
No Extra Tap Required - Fits Any Standard Mixer Tap
The PureMix Z7 installs under your existing kitchen bench and uses your current tap. This unit can be installed vertically or horizontally, so it won’t clutter up your cupboard.
FEATURES
- Specifically designed for mains, rain, harsh and rural water supply.
- Increased capacity to a massive 63,500 Litres.
- With the introduction of Z Plus Technology, this Z7 cartridge has the ability to inhibit bacterial growth.
- Provides pure, safe, filtered water, free of chlorine and harmful cysts+. Reduces Trihalomethane (THM's)
- Sediment, dirt, rust and other particles filtered down to 1 micron including Giardia and Cryptosporidium cysts+.
- No need for a separate filter tap.
- Quick and easy installation, ideal for stone bench tops. Mounts horizontally or vertically - no shelf cut-outs required.
- Incorporates Anti-scaling protection.
SPECIFICATIONS
- Ordering Code: PUREMIX-Z7
- Replacement Cartridge(s): Z7-R
- Flow Rate: 9.5 Lpm at 420 kPa
- Min/Max Temperature: 0° - 38°C
- Min/Max Pressure: 200 - 520 kPa
- Micron Rating: 1 micron*
- Capacity: 63,500 Litres*
- Connection: ½” BSP [15 mm]
- Warranty: 10 Years^
Scope of Work: The pricing provided on our website includes the cost of the hot water system unit itself, as well as basic installation services. Additional charges may apply for any necessary plumbing material’s, modifications, electrical work, permits, or unforeseen complications encountered during installation.
Installation Requirements: Prior to installation, it is the responsibility of the customer to ensure that the installation site meets all necessary requirements for the chosen hot water system, including but not limited to adequate space, ventilation, and access to utilities.
Warranty Information: All hot water systems supplied and installed by us are covered by manufacturer warranties. The terms and duration of these warranties vary depending on the brand and model of the system. Please refer to the manufacturer's warranty documentation for specific details.
Payment Terms: Payment for hot water system installation services is due upon completion of the work, unless otherwise agreed upon in writing. We accept various forms of payment, including cash, credit card, or electronic bank transfer.
Cancellation Policy: If you need to cancel or reschedule your hot water system installation appointment, please notify us as soon as possible. Cancellations made less than 24 hours before the scheduled appointment may be subject to a cancellation fee.
Liability: While we take every precaution to ensure the safe and proper installation of hot water systems, we cannot be held liable for any damages or losses resulting from the use or malfunction of the installed system, including but not limited to property damage, personal injury, or loss of income.
Customer Responsibilities: Customers are responsible for providing accurate information about their hot water system needs, as well as access to the installation site at the scheduled time. Failure to do so may result in additional charges or delays in service.
Governing Law: These terms and conditions shall be governed by and construed in accordance with the laws of Western Australia without regard to its conflict of law principles.
Changes to Terms: We reserve the right to modify or update these terms and conditions at any time without prior notice. Any changes will be effective immediately upon posting to our website.
Filter System T&C's:
- Recommended installation as close to water meter as possible to obtain maximum pressure.
- A maximum distance of 5m of pipe work is allowed for in installation. If pipe work exceeds 5m in installation a charge will be added for labor and extra pipe depending on pipe material used.
- Pressure reduction valve: If mains water supply exceeds 800kPa a pressure reduction valve must be fitted to inlet of the filter system to protect the system from fracturing and leaking.
- Grounds must be soil, sand grass or easily accessible. If surface is concrete paving, or any hard material that needs cutting. If this is needed, this will be an extra cost and charged at a per meter and per hour rate.
- Plumbing Installation: Where it is not known where pipe work water is located include eg. Under pavers, excavation requirements, concrete, limestone, or artificial lawn, time to investigate is required to identify the main supply pipe work for external and internal installations. Also identify pipework materials used and make sure it complies with WA plumbing regulations.
- All plumbing labor works come with a 7 year warranty .
- All materials used are Australian approved and are Water Mark certified.
By accessing or using our website and services, you agree to be bound by these terms and conditions. If you have any questions or concerns, please don't hesitate to contact us.